With the PIECAL 334Plus you can check, calibrate and measure all your current signal instruments in a 4 to 20 milliamp DC loop. It can be used at any access point in your loop. Source & Read 0.000 to 24.000 mA, simulate a 2 Wire Transmitter, or use the PIECAL 334Plus to simultaneously power your 2 Wire Transmitter and measure its output. Quickly diagnose ground fault and current leakage with the patented loop diagnostic technology (US Patent# 7,248,058).
Description
Features
- Calibrate Milliamp Instruments
Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
Read 0.00 to 52.00 mA
Read -99.99 to 99.99 V
Simulate 2-Wire Transmitter, Power & Read Transmitters
Menu Selectable 250 Ohm resistor for HART compatibility - Calibrate with Accuracy
Accurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs - Easy-to-Read Backlit Display
- Locate Loop Current Leakages
Automatic indication of Loop Current and Leakage Current. Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage typically appears as a Zero Shift and helps you decide if the transmitter needs calibration or if there is a problem in the loop wiring. - Faster Calibrations
Three output EZ-CHECK switch
2 speed EZ-DIAL
Stepping & Ramping - Includes Rubber Boot, Test Leads & Deluxe Hands Free Carrying Case (020-0211)
- Optional Accessories
AC Adaptor 120 V (020-0101); 240 V (020-0100)
NiMh Batteries & Charger 120 VAC/12V DC (020-0103)
Magnetic hanging strap(020-0236)
