PIE Piecal 820 Process Calibrator – mA • V • TC • Ohms • RTD • Hz

Description

Lighten up your toolbox

Pocket sized calibrator replaces toolbox of single function devices

Milliamp • Voltage • Frequency

Thermocouples • RTDs • Check Continuity

Use it as a milliamp and voltage calibrator

Source 0.00 to 24.00 mA, 0.00 to 10.25 V dc and 0.00 to 80.00 mV

Read to 24.00 mA, 00.00 to 10.25 V 0.0 to 60.0 V and and 0.00 to 80.00 mV

Simulate 2-Wire Transmitters

Power up transmitters & loops with the built-in 24 V power supply.

Simplify HART hookups with built-in 250 Ohm resistor

Calibrate directly in temperature (°C & °F)

The PIECAL 820 works with the instruments you use. Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P (Platinel II)

Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)

Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm

Checkout flow and vibration systems

Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.00 Hz, 9999.9 Hz, 9.9999 kHz & to 20.000 kHz

Quickly set any three outputs plus automatic stepping & ramping

Easily set any value quickly with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds.

Measure temperature sensors, frequency pickups, loop currents and voltage levels

Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability