Fluke 28 II Rugged Digital Multimeter

The Fluke 28 II digital multimeters define the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15°C to +55°C (5°F to 131°F, -40°C for up to 20 minutes) and 95% humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeters are built to work in the toughest environments.

Description

  • Measure up to 1000 V AC and DC
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended AC voltage bandwidth– 15 Hz to 20 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • New – IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Hi resolution 20,000 count display mode
  • True-rms ac voltage and current for accurate measurements on non linear signals
  • New – Backlit keypad buttons allow for easy visibility in lowlit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
  • MSHA approval

Accuracy Specifications
DC voltage Range 0.1 mV to 1000 V
Accuracy 0.05% + 1
AC voltage Range 0.1 mV to 1000 V
Accuracy 0.7% + 4
DC current Range 0.1 μA to 10 A
Accuracy 0.2% + 4
AC current Range 0.1 μA to 10 A
Accuracy 1.0% + 2
Resistance Range 0.1 Ω to 50 MΩ
Display counts 6000
Capacitance 1 nF to 9999 μF
Frequency 0.5 Hz to 199.99 kHz
Temperature -200°C to +1090°C
Low pass filter (Measurement on VSD’s) Yes
Compliance CAT IV 600 V , CAT III 1000 V
IP rating IP 67
Power Three AA batteries
Battery life 800 hours
General Specifications
Display Bar graph/backlight Yes/Yes
Data storage Peak transient capture 250 μS
Min/Max/Avg Yes
Reading hold Yes
Other features Relative readings (zero) Yes
Battery type Three AA batteries
Warranty and protection Safety rating CAT IV 600 V/CAT III 1000 V
Mine safety MSHA Approved
External protection Rubber holster
Drop test 10 feet drop test
Dustproof/waterproof Yes, IP 67 rated
Warranty Limited lifetime
Size (H x W x L) with holster 6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in)
Weight with holster 698.5 g (1.54 lb)